If you’re looking to buy a laser you may be familiar with the wide range of design features, beam colors, and output powers you’ll be able to choose from. But a common question that is not always so straight forward is, “how much output power for a burning laser pointer?”
Buy Burning Laser Pointers
As a rule it’s important to note that any laser less than 175mW will not provide enough heat to burn but any laser 200mW or over will produce enough heat to be considered a burning laser. If you’re looking for a laser that can light a match and more, make sure it’s at least 200mW of any color.
So what effect on burning power does beam color have if any? Because the burning ability of a laser is determined by its power and the amount of heat it can produce, the color will not make any difference (though it’s important to note that 532nm Green lasers are 7x – 10x brighter than any other laser color at the same power). In fact, infrared lasers which you cannot see with the naked eye can burn just the same as a bright green laser at proper output of 200mW or more.
3. Focus Adjusting Beam
When you’ve made your choice on an output power and beam color, you’ll next need to consider different features, and if you’re looking for burning ability you should look for a model with the ability to adjust and focus the beam. Now, this is not required for a burning laser as anything over 200mW will do, but this will help lasers on the edge be more usable as a burning laser and also increase the ability to burn as you can adjust the beam to condense and increase heat.
This was a very brief overview on understanding differences in burning ability regarding lasers, If you’re looking to Buy Burning Laser Pointers, look no further than almost 10 years of expertise right here at BigLasers.com 1-877-614-5304
If you’ve been browsing the web for a laser pointer you’ve seen that there are tons of different beam color and output power combinations to choose from. But this can become a bit confusing to those users new to the laser world, here we’ll look at some factors to help you understand the differences in laser output powers.
1. Output Power Basics
Burning Laser Pointers
A laser’s power is measured in Milli-Watts (mW) and typically are ranged from 5mW all the way to 1,000mW or 1 Watt. The higher a lasers output power the brighter it will be, the greater distance it will be visible for, and the greater the burning ability (when over 200mW).
2. Power In Relation To Color
Here is where it really gets confusing for most users as a 200mW green laser is 7 times to 10 times brighter than 200mW of any other color. So, a higher power blue, red, or purple laser, may actually be less visible or bright than a lower powered green laser (depending on how powerful it actually is). As a rule remember that green 532nm is at least 7X brighter than any other color at the same power.
3. Burning Ability
No matter the color of the laser, in order for a beam to produce enough heat to light a match or pop a balloon, you’ll need no less than 200mW. Of course, the greater the mW power the greater the burning ability of the laser you are considering.
With even just a few minutes online you can determine the most suitable high power or lower power laser for any application you may have in mind. Be sure to ask questions if you have them and always look for warranty periods of minimum 12 months before you buy a laser online. 1-877-614-5304
There is a wide variety of laser pointer colors available online today, which brings up the question: “what is the best laser color?”. Now, the answer to this is not so straight forward and will depend primarily on what you will need a laser for as well as what output power you’re looking for.
Best Laser Pointer Colors
1. What color is the brightest?
Green at 532nm is always the brightest color of laser light at the same output power. That means that a 100mW of green will be 7x brighter than a 100mW of any other color, so keep that in mind for brightness.
2. What is the best for burning?
Here the color of the laser beam matter little as it is the output power that determines burning ability. The higher the mW (milliwatts) the better the ability to burn and pop balloons, no less than 100mW will be needed and the higher the power the better.
3. What laser pointer should I buy?
That will depend on your budget, what you will need the laser for, and preference in as far as colors and output power. Always be sure to look for technical specifications and warranty periods before you buy, as well as FDA accession numbers and safety features included. Some lasers are sold as is others include accessories, so be sure to do your research.
No matter which laser you end up buying online in the end, you want to ensure that you do a bit of research into any company or model you’re considering. Where is the company located? Can you get help if you need it? What is their best model? All things to ask before you buy a laser pointer.
If you’re in the hunt to buy a laser pointer, you’re undoubtedly faced with a number of different questions to consider before choosing any particular model. Options like output power, laser color, design aspects, and safety features, can make knowing which laser pointer suits you best somewhat difficult.
Here we look at the most important factors to consider.
Best Laser Pointers
1. Laser Color
Because laser pointers are available in several different colors, it is important to understand the difference between them. As a standard, green at 532nm will always be the brightest color to the human eye at the same output power. Meaning that 200mW green will be 7 times brighter than 200mW of any other color.
2. Output Power
Just as color can determine brightness, the next most important factor is the actual output of the laser itself. The higher the output power (mW) the brighter the laser will be. If you’re looking for a burning laser you’ll need minimum 200mW and the higher power the better.
Because laser pointers are pieces of technology it is important to ensure that any model you’re considering has a warranty period of at least 12 months. After all, any company that cannot offer a substantial warranty most likely does not have that great faith in the quality of their goods.
With even just a few minutes of searching online you can find reputable laser providers offering a wide range of models to choose from. To find the best laser pointer online, look no further than the sole USA based provider, BigLasers.com
The brilliance behind the technology of laser pointers has taken forward leaps and bounds in recent years. With more and more powerful lasers being developed every day it is important to remind ourselves of some basic procedural safety measures that should always be kept in mind whenever using a laser pointer of high or low power.
1. Know Your Laser
Burning Laser Pointers
Even before we consider the basics of using a high power laser the first thing you must do is ensure you understand all aspects of your device. What is the output power exactly? What is the beam color and frequency? Does the laser have safety features like a delay or aperture shutter? What type of batteries are being used? Know your tool, it’s the most important of starting points.
2. Safety Goggles
Because burning lasers need 200mW or more to really produce enough heat to light a match or pop a balloon, they are also extremely bright. For this reason you should always utilize safety goggles that protect your eyes from the specific light frequency or color of the laser you’re using. When using lasers indoors or around reflective surfaces goggles should considered seriously.
3. Be Smart
Going through laser safety features and understanding the precautions of using a laser really don’t mean much if you act foolishly when using your laser. Never aim or shine your laser at air craft, motor vehicles, people, animals, or structures. Lasers can be very bright, useful, and fun pieces of technology when used with common sense.
No matter how you look at it, always use any laser pointer with safety in mind and do research into the specific model you’re considering before you buy. For the best selection of Burning Laser Pointers from the sole USA based laser pointer provider with such a wide selection, look no further than BigLasers.com
Whenever you’re looking for burning lasers, there are a few things you need to keep in mind to ensure that the laser pointer you purchase meets the expectations and specifications required for burning capabilities. Many enthusiasts tend to overlook some of the more basic details that can lead to a laser that does not qualify for the specific applications they have in mind.
Burning Laser Pointers
How much power do I need to burn?
This is where most users are unfamiliar with the specs and stats needed for a laser pointer to qualify as a burning laser. You’ll need a minimum of 200mW, and the higher the power the better, in order to produce enough heat to light matches, pop balloons, etc. Any laser less than 200mW cannot be expected to burn.
What laser color is the best?
There really is little difference as far as burning is concerned when it comes down to the laser pointers beam color. Green, red, blue, orange, and purple are all suitable assuming that the output is 200mW or higher. But as a rule, green is typically the most suitable due to the way in which the 532nm wavelength absorbs light, similarly to why plant life is green.
Whenever you’re looking for burning laser pointers you want to keep these few points in mind, do the research on your own, and look into the quality of any goods you’re considering. Not all lasers or laser companies are created equal and you should always do even just a few minutes of research before you buy.
With so many different laser pointer selections available today online, it can be a daunting task to find one that is not only high in power, but also high in quality. If you’re in the market for a powerful green laser, here are a few things to keep in mind:
1. Min. and Max. Power
High Power Green Laser Pointers
Because lasers use batteries, they will always peak in output power with a fresh charge and then stabilize to the average or minimum output when the system is engaged. Depending on what you need the laser for, you’ll want to get an idea of the range of capabilities of any unit before you buy it.
All lasers should include warranties, of at least 6 months to a year, in order for you to buy with confidence. If a model you’re considering has no warranties to speak of or less than 6 months, it is a good idea to look elsewhere. After all, how can you put your faith in a product if the company themselves is unwilling to guarantee its usage.
3. Safety Features
It is important to note that powerful lasers need to be used carefully and should incorporate certain safety features, like keys witches and IR (infrared filters). If you are unsure of what features are included, be sure to ask questions and contact the provider directly.
All lasers at BigLasers.com have IR filters to prevent any potentially hazardous laser light from ever being emitted form any laser we offer. If you’re looking for High Power Green Laser Pointers, look no further than the only USA based provider, right here at Big Lasers.
If you’re in the market to buy a laser pointer you’re probably well aware of the various different output powers (mW) and color frequencies (NM) available to you. But what really is the difference between laser pointers of varying color?
Here we look at understanding this difference.
1. Light Wavelength (NM)
Laser Pointer Colors
To put it simply, no matter if visible or invisible, light is a wave. Within the visible light spectrum the length of light waves is measured in Nanometers (NM) and directly determines what colors we visually see. For this reason every laser pointer will list within its technical specifications what color (wavelength) it outputs.
When considering laser colors the most common question is “what is the brightest color?” Green at 532nm is always the brightest laser color as green is the brightest color to the human eye and is also the reason plant life is green, it absorbs the most amount of light energy. This, however, does not cover the brightness based on output power, but strictly brightness based on color frequency.
3. Brightness In Relation to Color and Output Power
We now know that 532nm green light is the brightest laser color, in fact green is actually up to 7x brighter than any other laser color at the same output power. So, for example, let’s say we have a 100mW green laser and a 100mW red laser, the 100mW green laser will be 7x – 10x brighter than the red laser based on the light wavelength at the same power.
No matter what sort of laser you are looking for or what color you prefer, it is important to always do some research into the variations available in today’s wide range of laser pointers. Consider you’re desired application for the laser as this will help you determine how bright you will need any particular unit. Be sure to look for warranties and support should you need it and always Buy A Laser Pointer from a reputable and trusted source. Support@BigLasers.com 1-877-614-5304
Happy New Year!!! From all of us at BigLasers.com
Let’s make 2013 even more special.
Happy New Year 2013
It’s the busy holiday season and as we move closer to Christmas please remember that shipping times are important. If you’re trying to ensure delivery before the 25th of December, please don’t wait until the last minute!
Have questions? Need help in choosing the right laser? Don’t hesitate to contact us via phone (1-877-614-5304) or live chat during business hours, or anytime via email (email@example.com).
Shop our wide selection of Laser Pointers and buy online with confidence. 24/7 – 365 days a year.
Happy holidays from the Big Lasers Family!